UAVPOWER

QJ Series · Two-stroke UAV engines

QJ Series Two-Stroke Engines

Ten lightweight two-stroke engines from 9.6 kW to 70 kW, available in carbureted and electronic fuel injection versions. The range covers 130 cc to 618 cc for small reconnaissance UAVs, long-endurance fixed-wing platforms and larger payload aircraft.

QJ range at a glance

One engine family, ten power classes

10Models
9.6-70 kWPower range
130-618 ccDisplacement
2.5-30 kgEngine weight

QJ engines share a common design approach: aluminum crankcases, assembled pressed crankshafts, ceramic-coated cylinder bores and two-stroke lubrication mixed with gasoline. EI models use a carburetor for simplicity; EFI models use electronic fuel injection and ECU-controlled ignition for easier starting and more consistent fueling.

All figures are taken from the manufacturer's latest product manual. Confirm the final configuration, propeller and installation limits with UAVPOWER before flight.

Model range

QJ two-stroke engine specifications

Open any model to see the complete translated specification sheet, including fuel, ignition, cooling, static thrust and maintenance data.

QJ
Electronic fuel injection

QJ618EFI

40 kW at 6,000 rpm

A 618 cc EFI two-stroke for high-payload UAVs that need more power and a compact installed envelope.

Displacement
618 cc
Weight
23 kg
Cooling
Air-cooled
Fuel system
EFI
Full specifications
Bore
70 mm
Stroke
40.5 mm
Displacement
618 cc
Power
40 kW at 6,000 rpm
Torque
56 N·m at 5,000 rpm
Weight
23 kg including starter motor and ring gear
Fuel
92 RON unleaded or higher, or 100LL aviation gasoline
Oil mix
50:1 full-synthetic two-stroke oil
Crankcase
Aluminum, low-pressure cast / T6
Crankshaft
Assembled pressed crankshaft
Piston
Aluminum, hard-anodized crown, phosphate-coated surface
Cylinder
Aluminum with ceramic-coated bore
Spark plug
Two-stroke spark plug, 0.7 mm gap
Starting
24 V electric starter
Ignition
Variable ECU-controlled ignition
Firing order
1, 3-2, 4
Cooling
Air-cooled
Static thrust
65 kg at 100 m; 45 kg at 4,000 m
Propeller
30 × 25 cm
Maintenance
100 h inspection and carbon cleaning
Request this engine →
QJ-600cc two-stroke UAV engine
Electronic fuel injection

QJ-600cc

70 kW at 8,500 rpm

The highest-output QJ model, combining a 600 cc twin with EFI and water cooling for larger UAV platforms.

Displacement
600 cc
Weight
30 kg
Cooling
Water-cooled
Fuel system
EFI
Full specifications
Bore
72 mm
Stroke
72 mm
Displacement
600 cc
Power
70 kW at 8,500 rpm
Torque
85 N·m at 7,000 rpm
Weight
30 kg
Fuel
92 or 95 RON gasoline, or 100LL aviation gasoline
Oil mix
50:1 full-synthetic two-stroke oil
Crankcase
Aluminum, low-pressure cast / T6
Crankshaft
Assembled pressed crankshaft
Piston
Aluminum
Cylinder
Aluminum with ceramic-coated bore
Spark plug
Two-stroke spark plug, 0.7 mm gap
Starting
24 V electric starter
Generator
1,000 W brushless DC
Ignition
Inductive ignition
Firing order
Twin-cylinder simultaneous
Cooling
Water-cooled
Maintenance
100 h inspection and carbon cleaning
Request this engine →
QJ-550EI two-stroke UAV engine
Carbureted

QJ-550EI

37 kW at 6,000 rpm

A simple, proven 548 cc carbureted engine for long-endurance fixed-wing UAVs and target platforms.

Displacement
548 cc
Weight
22 kg
Cooling
Air-cooled
Fuel system
EI
Full specifications
Bore
66 mm
Stroke
40 mm
Displacement
548 cc
Power
37 kW at 6,000 rpm
Torque
52 N·m at 5,000 rpm
Weight
22 kg including starter motor and ring gear
Fuel
92 RON unleaded or higher, or 100LL aviation gasoline
Oil mix
50:1 full-synthetic two-stroke oil
Crankcase
Aluminum, low-pressure cast / T6
Crankshaft
Assembled pressed crankshaft
Piston
Aluminum, hard-anodized crown, phosphate-coated surface
Cylinder
Aluminum with ceramic-coated bore
Spark plug
Two-stroke spark plug, 0.7 mm gap
Starting
24 V electric starter
Ignition
Solid-state magneto ignition
Firing order
1, 3-2, 4
Cooling
Air-cooled
Static thrust
58 kg at 100 m; 40 kg at 4,000 m
Propeller
30 × 25 cm
Maintenance
100 h inspection and carbon cleaning
Request this engine →
QJ-550EFI two-stroke UAV engine
Electronic fuel injection

QJ-550EFI

37 kW at 6,000 rpm

The EFI version of the 548 cc engine, adding ECU-controlled fueling for easier starting and consistent altitude compensation.

Displacement
548 cc
Weight
22 kg
Cooling
Air-cooled
Fuel system
EFI
Full specifications
Bore
66 mm
Stroke
40 mm
Displacement
548 cc
Power
37 kW at 6,000 rpm
Torque
52 N·m at 5,000 rpm
Weight
22 kg including starter motor and ring gear
Fuel
92 RON unleaded or higher, or 100LL aviation gasoline
Oil mix
50:1 full-synthetic two-stroke oil
Crankcase
Aluminum, low-pressure cast / T6
Crankshaft
Assembled pressed crankshaft
Piston
Aluminum, hard-anodized crown, phosphate-coated surface
Cylinder
Aluminum with ceramic-coated bore
Spark plug
Two-stroke spark plug, 0.7 mm gap
Starting
24 V electric starter
Ignition
Variable ECU-controlled ignition
Firing order
1, 3-2, 4
Cooling
Air-cooled
Static thrust
58 kg at 100 m; 40 kg at 4,000 m
Propeller
30 × 25 cm
Maintenance
100 h inspection and carbon cleaning
Request this engine →
QJ-275EI two-stroke UAV engine
Carbureted

QJ-275EI

20 kW at 6,000 rpm

A lightweight 275 cc carbureted twin for medium UAVs, with high specific output and simple field maintenance.

Displacement
275 cc
Weight
12 kg excl. starter
Cooling
Air-cooled
Fuel system
EI
Full specifications
Bore
66 mm
Stroke
40 mm
Displacement
275 cc
Power
20 kW at 6,000 rpm
Torque
25 N·m at 5,000 rpm
Weight
12 kg including starter motor and ring gear
Fuel
92 RON unleaded or higher, or 100LL aviation gasoline
Oil mix
50:1 full-synthetic two-stroke oil
Crankcase
Aluminum, low-pressure cast / T6
Crankshaft
Assembled pressed crankshaft
Piston
Aluminum, hard-anodized crown, phosphate-coated surface
Cylinder
Aluminum with ceramic-coated bore
Spark plug
Two-stroke spark plug, 0.7 mm gap
Starting
24 V electric starter
Ignition
Solid-state magneto ignition
Firing order
Twin-cylinder simultaneous
Cooling
Air-cooled
Static thrust
51 kg at 100 m; 36 kg at 4,000 m
Propeller
30 × 20 cm, tractor or pusher
Maintenance
100 h inspection and carbon cleaning
Request this engine →
QJ275EFI two-stroke UAV engine
Electronic fuel injection

QJ275EFI

20 kW at 6,000 rpm

A 275 cc EFI twin with integrated 1,000 W generation, suited to UAVs that carry payloads requiring onboard power.

Displacement
275 cc
Weight
12 kg
Cooling
Air-cooled
Fuel system
EFI
Full specifications
Bore
66 mm
Stroke
40 mm
Displacement
275 cc
Power
20 kW at 6,000 rpm
Torque
25 N·m at 5,000 rpm
Weight
12 kg excluding starter motor and ring gear
Fuel
92 RON unleaded or higher, or 100LL aviation gasoline
Oil mix
50:1 full-synthetic two-stroke oil
Crankcase
Aluminum, low-pressure cast / T6
Crankshaft
Assembled pressed crankshaft
Piston
Aluminum, hard-anodized crown, phosphate-coated surface
Cylinder
Aluminum with ceramic-coated bore
Spark plug
Two-stroke spark plug, 0.7 mm gap
Starting
24 V electric starter
Generator
1,000 W brushless DC
Ignition
Inductive ignition
Firing order
Twin-cylinder simultaneous
Cooling
Air-cooled
Service ceiling
4,000 m
Maintenance
100 h inspection and carbon cleaning
Request this engine →
QJ-170EI two-stroke UAV engine
Carbureted

QJ-170EI

10.8 kW at 7,500 rpm

A compact 170 cc hand-start twin for small UAVs, with a 600 W generator and a low installed weight.

Displacement
170 cc
Weight
3.6 kg excl. starter
Cooling
Air-cooled
Fuel system
EI
Full specifications
Bore
52 mm
Stroke
40 mm
Displacement
170 cc
Power
10.8 kW at 7,500 rpm
Weight
3.6 kg excluding starter motor and ring gear
Fuel
92 or 95 RON gasoline, or 100LL aviation gasoline
Oil mix
30:1 full-synthetic two-stroke oil
Crankcase
Aluminum, low-pressure cast / T6
Crankshaft
Assembled pressed crankshaft
Piston
Aluminum
Cylinder
Aluminum with ceramic-coated bore
Spark plug
Two-stroke spark plug, 0.7 mm gap
Starting
Manual start
Generator
600 W brushless DC
Ignition
Solid-state ignition
Firing order
Twin-cylinder simultaneous
Cooling
Air-cooled
Service ceiling
2,000 m
Maintenance
40 h inspection and carbon cleaning
Request this engine →
QJ
Electronic fuel injection

QJ-170EFI

11 kW at 7,500 rpm

The EFI 170 cc twin adds electronic fuel control for easier starting and more consistent mixture at altitude.

Displacement
170 cc
Weight
4 kg excl. starter
Cooling
Air-cooled
Fuel system
EFI
Full specifications
Bore
52 mm
Stroke
40 mm
Displacement
170 cc
Power
11 kW at 7,500 rpm
Weight
4 kg excluding starter motor and ring gear
Fuel
92 or 95 RON gasoline, or 100LL aviation gasoline
Oil mix
30:1 full-synthetic two-stroke oil
Crankcase
Aluminum, low-pressure cast / T6
Crankshaft
Assembled pressed crankshaft
Piston
Aluminum
Cylinder
Aluminum with ceramic-coated bore
Spark plug
Two-stroke spark plug, 0.7 mm gap
Starting
Manual start
Generator
600 W brushless DC
Ignition
Solid-state ignition
Firing order
Twin-cylinder simultaneous
Cooling
Air-cooled
Service ceiling
2,000 m
Maintenance
40 h inspection and carbon cleaning
Request this engine →
QJ-130EI two-stroke UAV engine
Carbureted

QJ-130EI

9.6 kW at 8,500 rpm

The lightest QJ engine, a 130 cc carbureted twin for small UAVs where installed weight is critical.

Displacement
130 cc
Weight
2.5 kg excl. starter
Cooling
Air-cooled
Fuel system
EI
Full specifications
Bore
47 mm
Stroke
37.5 mm
Displacement
130 cc
Power
9.6 kW at 8,500 rpm
Weight
2.5 kg excluding starter motor and ring gear
Fuel
92 or 95 RON gasoline, or 100LL aviation gasoline
Oil mix
30:1 full-synthetic two-stroke oil
Crankcase
Aluminum, low-pressure cast / T6
Crankshaft
Assembled pressed crankshaft
Piston
Aluminum
Cylinder
Aluminum with ceramic-coated bore
Spark plug
Two-stroke spark plug, 0.7 mm gap
Starting
Manual start
Generator
600 W brushless DC
Ignition
Solid-state ignition
Firing order
Twin-cylinder simultaneous
Cooling
Air-cooled
Service ceiling
2,000 m
Maintenance
40 h inspection and carbon cleaning
Request this engine →
QJ
Electronic fuel injection

QJ-130EFI

9.8 kW at 8,500 rpm

A 130 cc EFI twin for small UAVs that need electronic fueling and a very low installed weight.

Displacement
130 cc
Weight
2.9 kg excl. starter
Cooling
Air-cooled
Fuel system
EFI
Full specifications
Bore
47 mm
Stroke
37.5 mm
Displacement
130 cc
Power
9.8 kW at 8,500 rpm
Weight
2.9 kg excluding starter motor and ring gear
Fuel
92 or 95 RON gasoline, or 100LL aviation gasoline
Oil mix
30:1 full-synthetic two-stroke oil
Crankcase
Aluminum, low-pressure cast / T6
Crankshaft
Assembled pressed crankshaft
Piston
Aluminum
Cylinder
Aluminum with ceramic-coated bore
Spark plug
Two-stroke spark plug, 0.7 mm gap
Starting
Manual start
Generator
600 W brushless DC
Ignition
Solid-state ignition
Firing order
Twin-cylinder simultaneous
Cooling
Air-cooled
Service ceiling
2,000 m
Maintenance
40 h inspection and carbon cleaning
Request this engine →

Shared engineering

Designed for UAV installation and service

Lightweight construction

Aluminum crankcases and cylinders keep installed weight low. The smallest 130 cc models weigh 2.5-2.9 kg before the starter and ring gear.

Fuel flexibility

Engines run on 92 or 95 RON gasoline or 100LL aviation gasoline, with 30:1 or 50:1 full-synthetic two-stroke oil depending on the model.

Simple maintenance

Large-displacement models use a 100-hour inspection and carbon-cleaning interval. The 130 cc and 170 cc models use a 40-hour interval.

Need help choosing a QJ engine?

Send your platform weight, payload, endurance target and propeller data. We will recommend the right displacement and fuel system, then support installation and spare parts.